Motorized Shades

Greenwood Motorized Shades

Automated shades for the Greenwood windows nobody can reach

Call (317) 854-7158Get Free Quote
Quick Answer

Read these before you choose a fabric. Material, mount and lift decisions constrain what fabrics make sense, and working in that order avoids falling for something that won't work in the room.

  • Service: Motorized Shades for Greenwood homeowners
  • Service area: Greenwood, IN and surrounding areas
    • For a new order, plan on a measure appointment, then two to five weeks of fabrication, then an install visit. For a broken tilt gear or a dead battery, it's usually a single short visit and no waiting.
  • Insured and bonded
  • Serving Greenwood, IN since 2008
Motorized Shades Services

Expert Motorized Shades for Greenwood Homes

Motorization stops being a luxury the moment a window is out of reach, and Greenwood built a lot of those. The two story great room glass wall shows up in almost every post-1995 plat west of US 31, and palladian assemblies in the gable were routine on 1995 to 2007 elevations. Add stair hall units and the upper row of a mullion assembly and a typical 1,800 to 2,600 square foot Center Grove two story has four or five openings nobody is going to operate with a ladder. Motorizing those and leaving the reachable ones manual is the version of this that most Greenwood houses actually need.

Batteries are the under disclosed cost. Hunter Douglas states PowerView battery life at about one year, and that is per shade. Motorize twelve openings and you have taken on a recurring task, not a one time purchase. Hardwiring removes it but has to be planned before the walls are closed, which rules it out in the 39.8 percent of Greenwood stock built between 2000 and 2019 unless you're already opening things up. Then there's the network: a hub or bridge, sometimes a repeater in a long house, travel limits that need setting, and pairing that occasionally needs redoing after a firmware update.

When to Call

Signs You Need Motorized Shades

If you notice any of these in your Greenwood home, it is worth booking a measure. None of it is urgent, and none of it fixes itself either.

The system has no record of what's installed

Signal drops out crossing a brick wall inside

Batteries died in February on the north side

Nobody in the house will open the app

You want the shades on a sunrise schedule

A shade sits behind furniture you have to move

Glass above the tub is out of reach

The previous installer owns your app account

The hub brand stopped making the motors you have

A stair landing window hasn't moved in years

Our Process

How Greenwood Window Treatments Handles Motorized Shades

Every job follows the same five-step process. Transparent, thorough, and done right the first time.

1

Hub and repeater placement planned

2

Motors paired, addressed and labeled

3

Travel limits set and re-checked

4

Accounts and passwords handed over

5

Battery change behavior tested on site

Real Project Photos

Motorized Shades in Greenwood

Photographs from real motorized shades jobs completed by our crew in Greenwood and surrounding areas.

Custom shades measured and installed in GreenwoodPlantation shutters fitted to a Greenwood windowCellular shades in a Greenwood living room
Scope of Work

What Motorized Shades Includes

Every Greenwood job is documented item by item. Here is what the crew covers.

Power method decided per window before anything else: battery, rechargeable or hardwired

Battery replacement cost and interval put in writing before the order, not after the install

Hardwired runs referred to a licensed electrical contractor, with our low-voltage locations marked for them

Radio path checked on site, since masonry, foil-faced insulation and metal studs all cut range

Hub or bridge placement chosen for signal, not for whichever shelf is closest to the router

Repeaters specified where a shade sits on the far side of a wall the signal won't cross

Protocol settled up front, plain RF for a standalone group or Zigbee, Z-Wave, Thread or Matter for integration

Three widths and three heights per opening with a diagonal square check

Mounting depth measured for the motor, the tube and any cassette or fascia

Roll direction and control side written on the order the same as any manual shade

Motors paired and addressed on site, then labeled so the next person can tell them apart

Travel limits set at the top and bottom of every shade and re-checked after the fabric relaxes

Scenes built with you in the room so the buttons match how you actually use the house

Sun sensors sited where they read real sun rather than shade from the eave

Astronomical timers set to local sunrise and sunset so schedules drift with the season

Remotes, keypads and app accounts handed over with the passwords in your name

A written walkthrough of how to re-pair a shade and reset a limit if you ever need to

Written contract with scope, dates and total price, as IC 24-5-11 requires on residential work over $150

Pricing

What Motorized Shades Cost in Greenwood

National figures for motorized window coverings run roughly $300 to $1,500 per window installed. Treat that as a national range for the category rather than a quote for your Greenwood address, and know that the shade itself still follows fabric and size the way a manual one does. Motorization adds the motor, the power method and the control layer on top. A battery motor with a handheld remote is the least expensive path. Rechargeable batteries add a charger and sometimes a small solar panel. Hardwired costs the most because a licensed electrical contractor has to bring power to the header. Then there's the control side: hubs, repeaters, keypads, sensors. Greenwood Window Treatments itemizes all of it so you can see what you're buying in Johnson County before you commit.

By Product

How Motorized Shades Differ by Product

Every product in this trade behaves differently in a room. Here is what that means for this work.

Alkaline battery wand: A tube of batteries inside or behind the headrail. It's the cheapest way to motorize and it needs no wiring at all. The cost lands later, in replacement batteries and in getting a ladder out to reach a tall window.

Rechargeable lithium battery: A removable pack you charge every so often, sometimes with a small solar panel doing a trickle charge at the window. It cuts the battery waste and the surprise, and it suits a house where the shades run several cycles a day.

Hardwired low-voltage motor: Constant power to the header, so nothing to charge and nothing to replace. It has to be planned before drywall or fished afterwards, and the power work belongs to a licensed electrical contractor rather than to us.

Point-to-point RF remote: A handheld that talks straight to the motors with no hub in between. It's the simplest thing that works, it keeps the shades off your network entirely, and it's the right call when nobody wants an app.

Hub or bridge: The box that puts your shades on the network so an app, a schedule or a voice assistant can reach them. Where it sits decides whether the far bedroom responds, so we place it for signal rather than for convenience.

Repeater: A small plug-in device that catches the radio signal and passes it along. Specify one when a shade is on the far side of a masonry wall, behind foil-faced insulation, or in a wing the hub can't reach cleanly.

Zigbee or Z-Wave: Mesh protocols where every mains-powered device extends the network. Choose one when the shades need to join an existing smart home rather than run as their own island, and match whatever the rest of the house already speaks.

Thread and Matter: The newer path for cross-brand control, with Thread as the radio mesh and Matter as the common language. It's the choice when you want shades to work with hardware from more than one manufacturer without a translator in the middle.

Sun sensor: A sensor that drops the shades when direct sun hits and raises them when it passes. It protects a floor or a piece of art on a hot elevation without anyone thinking about it, provided we site it where it reads real sun.

Astronomical timer: Scheduling tied to local sunrise and sunset rather than clock times, so the shades follow the season instead of needing a reset every few weeks. It's the single setting that makes automation feel considered rather than annoying.

Light Control

See What Each Fabric Does To The Light

Pick a fabric below and the window updates. It's a drawing rather than a photograph, so read it as a rough guide to what each family does in a Greenwood room, and to what it doesn't do.

Fabric type

Sheer, 10 percent openness

Ten percent of the weave is open, so you keep the view and most of the daylight. Glare drops a little. After dark, once your lamps are on, someone outside can read shapes through it, which is why this belongs on a view window rather than a bedroom.

Openness factor is printed on the fabric card, so you can compare one line against another before you order anything.

Keeps the viewNot private after dark

Solar, 5 percent openness

The usual pick for a west window or a covered porch. You can still read the yard through it, glare comes down noticeably, and the fabric intercepts a good share of the sun before it reaches you at four in the afternoon.

It also cuts the UV landing on floors and furniture. NFRC puts UV at roughly 40 to 60 percent of fading damage, so this slows fading rather than stopping it.

View and glare controlSlows fading

Solar, 3 percent openness

A tighter weave. The room goes dimmer and the view drops back to an outline. Choose it where the sun is the problem and the view is second, which around here usually means a west wall in July. That's a common call on this side of Indianapolis.

Openness affects how much you see out, not how private you are. A 3 percent fabric still shows silhouettes at night.

View becomes an outlineStrong glare control

Solar, 1 percent openness

Close to a solid fabric with a little view left in it. This is the strongest glare control in the solar family.

The trade is that it darkens the room on a gray January day too. Indianapolis averages a January high near 36F and the light is flat, so think about how the room reads in both seasons before you commit.

Darkest solar optionDim on gray days

Light filtering

No view through it. Daylight comes through the face diffused, so the room stays bright without a hot spot across the television or the kitchen island. This is the default for living spaces.

It isn't private in reverse at night. With the lamps on and the sun down, silhouettes still show.

No view through itBright without the glare

Room darkening

A denser fabric, usually with a liner behind it. Most of the light coming through the face is gone.

Light still arrives around the edges on an inside mount, so a room darkening shade gives you a dim room rather than a dark one. If someone in the house sleeps during the day, say so at the measure and we'll scope it differently.

Dim, not darkEdges stay bright

Blackout

The fabric itself passes essentially no light. What you'll still see is the perimeter. Lutron publishes an inside-mount light gap of about 3/4 inch per side on its Roller 20 and 64 shades, along with a standard factory deduction of 1/16 inch per side, and shades over 120 inches tall or past a 4:1 height-to-width ratio get larger gaps than that.

So if you need a genuinely dark bedroom, that gap has to be dealt with on purpose, either with side channels or by going outside mount. We tell you which one your opening can carry while we're still standing in the room.

Dark facePerimeter needs a plan

Openness factor is a measured fabric spec, so you can compare it line to line. The category names are not measured. One maker's room darkening can behave like another maker's light filtering, which is why the sample books come to the measure and get opened in the room they're going in, at the hour that room has the problem.

Common Questions

Motorized Shades FAQ

Questions we hear most often from Greenwood homeowners considering motorized shades.

Plan on about a year per shade, because that's what Hunter Douglas publishes for PowerView. The number moves with how often the shade cycles and how much weight the motor is lifting, so a wide great room shade running twice a day drains faster than a bedroom shade on a timer. Twelve motorized openings in a Center Grove two story means roughly one battery event a month somewhere in the house, and they never fail at a convenient height. That's the argument for rechargeable battery wands with a trickle charge, or for hardwiring the tall units and leaving the reachable ones manual.
Pick for the house rather than for the brand. Radio frequency systems from the shade manufacturer are the most reliable for shades alone and usually need a hub or bridge to reach your phone. Zigbee, Z-Wave, Thread and Matter get the shades onto a wider home system alongside other devices, at the cost of another layer that can go wrong. A long ranch plan in Carefree stretched across a curving lot may need a repeater to reach the far bedroom. We survey the actual distances before quoting, because a system that works in the showroom and drops out in your back bedroom helps nobody.
Sometimes, and the honest answer usually depends on the headrail. Some manufacturers offer a retrofit motor for their own current product lines, so if your shades are recent and from a line still in production, it can work. Older shades, discontinued lines and most stock product cannot be retrofitted and the labor to try isn't worth it. If your house has 18 to 24 openings and you're only unhappy about the four you can't reach, replacing those four with motorized units and leaving the rest alone is normally the better spend, and we'll say so.
Nationally, motorized shades run about $300 to $1,500 per window installed, and where you land in that band depends on shade size, motor type and whether you're adding a hub. That's the shade and the motor together, not an add on to a manual price. Doing the four unreachable openings in a two story great room is a very different total from motorizing every window in the house. Indiana's Home Improvement Contract Act (IC 24-5-11) requires a written contract with scope and total price on residential work over $150, so you'll have the whole number in writing before anything is ordered.
An astronomical timer does, more often than a sun sensor. Greenwood's arterials run on the section line grid, so subdivisions fronting east west roads like Smokey Row or Stones Crossing put principal elevations north or south, and sunrise and sunset times are the predictable variable. An astronomical timer tracks those through the year without you touching anything. A sun sensor reacts to cloud, which sounds better and in practice means shades moving up and down on a partly cloudy April afternoon. We usually set scenes on the timer and leave the sensor out unless a specific room justifies it.
The motor is a serviceable component in most current systems, so a failure means replacing a motor rather than a whole shade, and that's a meaningful difference in a house with a dozen of them. Keep the paperwork: motor model, shade line and the date it was installed. Travel limits usually need resetting after a motor swap, which is a short visit rather than a job. The part worth thinking about now is availability, because a system from a manufacturer that discontinues a line leaves you sourcing parts in five years. We'll tell you which lines we'd rather stand behind.
This is the number that should be said out loud before the sale, not discovered after it. Hunter Douglas states that PowerView battery life is about one year. Other manufacturers land in similar territory depending on how many times a day the shade runs, how heavy the fabric is and how tall the unit is. So a house with fifteen battery shades is a house with fifteen battery changes on a rolling schedule. If that sounds like a chore, it is, and it's exactly why we ask about rechargeable or hardwired first.
Batteries are cheapest up front and cost you in replacements and ladder trips. Rechargeable packs cut the waste and the surprise, and a small solar panel at the window can trickle charge them so you touch them rarely. Hardwired is the best experience and the most planning: power has to reach the header, and that work belongs to a licensed electrical contractor. Our rule of thumb is simple. High windows and daily-use rooms want power. A guest room shade you move twice a month is fine on batteries.
Only if you want more than a remote. A point-to-point RF remote talks straight to the motors, it isn't on your network, and it keeps working if your internet doesn't. Add a hub or bridge when you want scheduling, phone control, voice, or shades that respond to something else in the house. The tradeoff is a device to maintain and an account to own. Plenty of Greenwood clients are happier with three good remotes and no app at all.
Almost always radio path rather than a broken motor. RF signal loses strength through brick, block and stone, and it struggles badly with foil-faced insulation, which behaves like a mirror to radio. Metal studs do the same. A shade that worked from the hallway and not from the kitchen is telling you where the wall is. The fix is usually a repeater in the right spot, or moving the hub. We check the path at the measure so this gets designed around rather than discovered.
The limits are the top and bottom stopping points programmed into the motor. We set them on install day so the fabric lands exactly where the hembar should sit and the roll stops before it strains anything. New fabric relaxes slightly over the first few weeks, so a shade set perfectly in week one can sit a fraction low in week four. That's normal, it's a two-minute adjustment, and we'd rather you call us than live with a hembar that's off by half an inch.
A scene is one button that moves a group of shades to set positions. Good ones map to how you actually live: morning, glare, movie, away. Bad ones are a list of thirty presets nobody remembers. We build scenes with you standing in the room, because the right stopping point for a west-facing living room at four in the afternoon is a judgement call, not a number. Three or four well-named scenes beat a screen full of options every time.
Usually, and the details matter more than the yes. Some systems need their own hub before any assistant can see them. Zigbee and Z-Wave systems want to match whatever the rest of your house speaks. Thread and Matter are the newer route to getting hardware from different manufacturers cooperating. We settle the protocol before we order, because retrofitting the wrong choice means new motors, not new software. Tell us what's already in the house and we'll work backwards from that.
They're the safest lift on the market, because there's no operating cord anywhere on the product. That's the outcome ANSI/WCMA A100.1-2022 pushes toward on cord access, and an inner-cord failure is treated as a substantial product hazard under 16 CFR 1120.3. Motorization also solves the tall window problem without putting a long cord in reach. The one thing worth doing is keeping remotes out of small hands, less for safety than for your own sanity.
Quieter than most people expect and not silent. A modern battery motor makes a low hum for the few seconds the shade is traveling, roughly the level of a quiet conversation, and hardwired motors are usually quieter still. In a bedroom that runs on a sunrise schedule, that sound is what wakes light sleepers. If somebody in the house is sensitive, we can slow the travel speed on some systems or schedule the move for a few minutes before the alarm.
Battery and rechargeable shades don't notice. Hardwired shades stop until power returns, and they keep their programming, so nothing needs re-teaching. Hub-based systems come back on their own, though a hub that lost its network may take a few minutes to reconnect. What doesn't survive an outage is a schedule tied to a clock that reset. Astronomical timers tied to sunrise and sunset ride through it, which is another reason we prefer them.
Sometimes, and it depends on the product. Certain roller shades can take a motor into the existing tube if the tube diameter and the bracket style match a motor made for it. Cellular and blind lift systems generally can't be converted in any way we'd stand behind. We'll look before we say no. What we won't do is put a motor into a tired mechanism and let you pay twice when the shade itself gives up a year later.
A timer handles the predictable part: shades down at sunset for privacy, up at sunrise for daylight, following the actual sun rather than a fixed clock time. A sun sensor handles the unpredictable part: it drops the shades on the hot elevation when direct sun arrives and lets them back up when a cloud rolls through. Used together, the timer sets the baseline and the sensor overrides it. Siting the sensor is the whole trick, since one in shade reports a permanently cloudy day.
You do, and we set it up that way on purpose. The hub gets registered in your name with your email, and you get the credentials in writing at handover along with the shade names and the scene list. We've been called into too many houses where the previous installer owned the account and nobody could add a shade without tracking that person down. Your house, your account. We're happy to be added as a helper, and we're happy to be removed.
Nationally, motorized window coverings run about $300 to $1,500 per window installed, against roughly $250 to $2,600 per window for custom shades generally. Those are national category ranges, not a quote for Greenwood. Read them as overlapping rather than one being a multiple of the other, because fabric and size still dominate. The honest way to budget is to price the shade you want manually, then add the motor, the power method and the control layer as separate lines. Greenwood Window Treatments writes it out that way.
Areas We Serve

Motorized Shades Across Greenwood

We measure and install in every one of these Greenwood neighborhoods. Each has its own page with the build eras, window conditions and mounting notes for that section.

Related Services

Other Window Treatment Services in Greenwood

Greenwood Window Treatments handles the full scope of window treatment work. Explore our other services below.

Faux Wood Blinds in Greenwood

Moisture proof slats where Greenwood kitchens and baths punish real wood

Learn more →

Wood Blinds in Greenwood

Stained basswood for Greenwood's stain grade trim, honestly specified

Learn more →

Vertical Blinds in Greenwood

Vane systems for the sliders on nearly every Greenwood rear elevation

Learn more →
Free In-Home Measure

Schedule Your Free In-Home Measure in Greenwood

Contact Information

Reach Us Directly

Our team prioritizes scheduled measures and service calls, and books in-home measures during business hours.

Office
1417 Commerce Avenue, Indianapolis, IN 46201
Hours
Mon-Fri 8a-6p
Service Area
Greenwood, IN and Surrounding Areas

Ready to Book Your Measure?

Call us to set up an in-home measure, or to ask about a treatment that has stopped working. We will talk it through on the phone first.

Call (317) 854-7158
Service area

Serving Greenwood and the surrounding area

Call NowGet Quote